Chapter 0005 - Not fighting for buns without fight

　　"A fat student borrowed a set of shovels to go to the turning shop at 10:00 am?" When Liu Lao slipped to the locksmith workshop at one o'clock in the afternoon, he found that a set of tools was missing, and he asked to find out what was going on. 　　The tools placed outside were communal, not the set that Liu Lao specialized in. Liu Lao that set is Liu Lao before retirement to build their own special, the next person is not qualified to use. 　　But even so, also let Liu Lao some surprise. What is a student borrowing a spatula for? Could it be that those lathe rails have a problem and someone wants to fix it, so let that fat student come over to run errands and get tools? 　　The more he thought about it, the more wrong it tasted, Liu Lao still decided to go over and take a look. Anyway, the road is not far, take a look and rest assured. Don't that student take get something out of it. 　　Just about to get up, Guo Tailai came in. He came to return the tools, a morning's work, enough for him to correct that 1933 old lathe guide of Rheinmetall. 　　"Fatty, what are you doing with the spatula?" Elder Liu waited for Guo Tailai to put his tools away before he asked. 　　"There is a lathe guide rail a little problem, took it to shovel a little." Guo Tailai replied casually. 　　Buzz, Liu Lao's brain buzzed, the most unwanted thing happened. The guide rail of the lathe is so easy to shovel? If it was really given a bad shovel, that lathe would be scrapped. 　　"Take me to take a look." After all, Liu Lao had gone through many things, even if he panicked for a moment at first, he immediately regained his composure. 　　If it's really broken, let's see if it can be repaired! It's good to never scrap it. Mentally pondering, Liu Lao escorted a puzzled fat man all the way to the turner's workshop. 　　In fact, Liu Lao has no hope. A lathe guide rail, even if it is a six or seven level clampman, it will take a few days to really fix the flat. Fatty ten o'clock in the morning to borrow the tools, to now only a little more than one o'clock, shaving off the time to eat, a full two hours, just hope not to shovel too much can be repaired on the good. 　　Followed the fat man all the way into the turner's workshop, looked at the fat man ignored those lathes in the workshop, directly to the small room to go, Liu Lao is considered a sigh of relief. Not outside these lathes on the good, inside only two old antique, not production, estimated that the most valuable is that the two beds, the loss is not big. 　　If the old antique guide rail is really broken, then it is also broken! There would have been a problem, and keeping it would have been just a little souvenir. But the fat man can not be forgiven, how dare you shovel guide rail without permission? 　　"Clamping workshop has a superb set of tools, but unfortunately do not know who it is, locked not to use." Guo Tailai completely did not feel the back of Liu Lao's mood changes, while opening the door while casually said: "Pity a good set of tools ah!" 　　"That set of tools is my old man's, what makes you worthy of that set of tools?" Liu Lao was furious when he heard this, why is it a pity if it's not for you fatty? 　　Guo Tai Lai shrank his neck and no longer dared to speak. Being caught talking small talk behind someone's back, so humiliating. Lowering his head, he walked all the way to the side of the old lathe of the Rhine metal that he used. 　　Liu tiger face, walked to the front of the lathe, a hand to push Guo Tailai away. This lathe, Liu Lao can be too familiar than Guo Tailai too much, what is the problem, he also know exactly, do not need Guo Tailai introduction. 　　As soon as he lowered his head, Liu Lao's eyes widened violently, how is this possible? 　　The old lathe from 1933, the guide rails were badly worn not to mention that there was a slight deformation because it was dropped once during a certain handling. Since it was only a lathe of commemorative significance, it was reinstalled back. 　　The easiest thing to do was to replace the rails with new ones, but this was obviously not possible; there were no spare parts for a 1933 lathe, no brand new ones to replace the rails. After all, the German sewer was just a paragraph, not a fact. 　　Without a new one, the wear is so severe that it can only be scraped and burred out, or in plain English, shoveled out, after a complete finish grinding. 　　Rough machining of the guide is a grinder, finishing is actually by manual processing out. Highly skilled workers to take a fine spatula, with a leveling device to find which is not flat, with a small shovel in that shovel, a guide to shovel a few days, and finally out of the guide is densely patterned everywhere, in fact, this is shoveled traces. 　　Can shovel guide, at least must be the level of the clamp five, that is, Guo Jianjun that level, that is the entry level. 　　Even if the pincers level eight of the great masters, want to fine shovel a qualified guide, at least a few days. Eat kung fu in addition to craftsmanship, there are also measurements. 　　Fatty was originally a student, all of his spare time was devoted to clamping work, it is impossible to become a clamping grade 8 at this age. Not to mention the eighth grade, even if the fat man is diligent, can have a two or three would be good. 　　As the saying goes, three years a fine turner, ten years a bad pliers, this is not just talk, pliers, that is the most eat effort. From the fat man borrowed the tool to now full count only three hours, can do what? 　　But now Liu saw the scene in front of the old man is completely subverted his common sense. Lathe bed body actually has a brand new rail, how is this possible? 　　No, not new. Liu old experience is too rich, surprised for a moment to find that this is not a brand new guide rail, but after fine processing and polished guide rail. 　　Habitually reached out on the rail from one end to the other, touching the process even closed his eyes and held his breath. Old workers of their generation, the touch of the fingers is the most precise measuring tool, sometimes more accurate than a ruler. 　　The guide rail was straight and even and smooth, without any deviation, at least Liu Lao had not felt any deviation. According to Liu Lao's experience, the leveling error of the whole guide rail is completely below one thread, he can't even feel a little bumpy feeling, completely different from the hand-shoveled guide rail with that kind of patterned shape. 　　"Master!" This was the first reaction in Liu Lao's head. The moment he thought that such a young fat student had this level, Liu Lao's body couldn't help but shiver. 　　Liu Lao's reaction made Guo Tailai look at him for a while, if something bad happens to this old man here, then what can be done? 　　"Have you had lunch yet, fatty?" Liu Lao suddenly asked an inexplicable question. 　　"Eaten!" Guo Tailai didn't know why Liu Lao asked this, hurriedly answered, "Nine cafeteria eat." 　　This time Liu Lao had a plan, from here to the nine cafeteria, round trip plus the dinner queue, how can it be forty-five minutes. Then remove the time to dismantle the old lathe, that is to say, in front of the eyes of this unimpressive fat man at most only used one and a half hours to complete the entire guide rail scraping and leveling operations, but also by the way to do a polishing, this guy is a monster? 　　"Wait for me at the clamp workshop tomorrow morning." Liu Lao held back his excitement and left a sentence for Guo Tailai, then pondered all the way on how to temper the fat man, and left with a flourish, leaving behind a bewildered Guo Tailai, touching his head, half a day without reacting.